Atag CS4674M Manuel D'utilisation page 215

USE
PROGRAMS
180
Culisensor-mode
4. Select an oven function, temperature and core temperature (see
'Function-setting display' chapter).
5. Start cooking the dish using the confirm button.
165
°C
180
°C
Culisensor mode
• The following values can now be read in the display:
▷ current temperature (165 °C)
▷ set temperature (180 °C)
▷ status indicator core temperature (outer circle)
▷ status indicator temperature (inner circle)
▷ Current core temperature (35 °C)
▷ Set core temperature (70 °C)
• The cooking process ends once the set core temperature is
reached. At the end of a dish's cooking time a sound signal will
sound. The signal can be switched off by opening the oven door
or pressing a button.
• Always place the culisensor's entire metal sensor in the dish.
• Please note! After the cooking process always replace the
rubber cap on the culisensor's connection.
• Only use the culisensor in your oven.
• Ensure that the culisensor does not come into contact with the
heating element during cooking.
• The culisensor will be extremely hot after the cooking process.
Be careful! Avoid burns.
10 : 15
70
°C °C
10 21
35
°C
70
°C
EN 35