Husqvarna AUTOMOWER 520H Guide Rapide page 3

For more information and instructions, read the complete Operator's manual on the Husqvarna website
(www.husqvarna.com).
1. G E T T I N G S TA R T E D W I T H AU TO M O W E R® CO N N EC T
Automower® Connect brings the menu system of the product to the mobile device, making it easy to read and change the
settings remotely.
a. Download the Automower® Connect app from AppStore or GooglePlay.
b. Sign up and specify an e-mail address and a password to create a Husqvarna account.
c. Follow the instructions in the validation e-mail within 24 hours to validate your account.
1.1 PA I R I N G T H E P R O D U C T A N D T H E M O B I L E D E V I C E
When the account has been created, you can pair the product and your mobile device. The normal pairing process involves
the following steps:
Note: The first time you start the product there are additional steps in the pairing sequence. Follow the instructions in the app.
a. Log in to your Husqvarna account in the app.
b. Enable Bluetooth® mode on your mobile device.
c. Set the Main switch to position 1 on the product.
Note: The product is available for pairing for 3 minutes. If pairing has not been successful within this time period, switch off
the product (Main switch, position 0). Wait until the LED indicator lamp goes out, and then set the Main switch to position 1
again.
d. Select My mowers in the Automower® Connect app, and then select the plus sign (+).
e. Select model. The Automower® Connect app is now searching for available products within short-range (Bluetooth®).
f. Select product.
g. Enter the PIN code for the product.
h. Press Pair to connect the product to your Husqvarna account.
i. Name your product, and select Done.
1. 2 USING AUTOMOWER® DIRECT FOR TEMPORARY ACCESS
Automower® Direct (short-range Bluetooth® connectivity) offers a fast access to the product, and is for example useful if
there is no cellular connectivity available.
a. Select Automower® Direct in the app.
b. Activate Bluetooth® pairing mode on the product:
• Switch off the product (Main switch, position 0).
• Wait until the LED indicator lamp goes out, and then set the Main switch to position 1 again.
c. Select product to pair with.
d. Enter the PIN code for the product.
2. CO N N EC T I V I T Y A N D H U S QVA R N A FL E E T S E RV I C ES™
a. Long-range cellular connectivity
b. Short-range Bluetooth® connectivity
c. Device tracking (GPS)
d. Husqvarna Fleet Services™
e. App link between Husqvarna Fleet Services™ and the Automower® Connect app.
Husqvarna Fleet Services™ is a cloud solution that gives the commercial fleet manager an updated overview of all the
machines. The product is paired to the rest of the fleet by using Automower® Connect in conjunction with the Husqvarna
Fleet Services™ app, which is available at AppStore and GooglePlay.
QG_P2C, P2CH_2021.indd 3 QG_P2C, P2CH_2021.indd 3
E N
2020-04-27 15:38:15 2020-04-27 15:38:15