Beko CEG 3192 B Mode D'emploi page 20

6
Cleaning
WARNING: Keep skin/body away from hot water.
8. When all the water in the water tank has been emptied, the
Remove all the remaining solution in the water tank and fill the tank with normal tap water up to the
max position. When the tank is full, the
cleaning process.
9. When the self-cleaning process is completed, the appliance will switch off automatically.
6.3 Empty System Function
Use the empty system function before a long period of non-use, for frost protection, and before talking
to a repair agent.
1. In standby condition, press and hold the
2. will then start flashing.
3. Remove the water tank from the appliance.
way. Press before removing the water tank to return back to the standby.
4. When the empty system function is completed, the appliance will switch off automatically.
WARNING: After performing the EMPTY SYSYEM FUNCTION; press the hot water button
until water can comes out from the spout when the coffee maker is reused again.
6.4 Manual Rinsing
You can manually rinse to clean the coffee nozzle after use. If the appliance has not been used for a long
period of time, a manual rinse may be a good idea.
1. In standby, press and hold the
2. The hot water button
go off. The coffee nozzle will then dispense a small amount of water which is used for rinising.
WARNING: The water comes out of the coffee nozzle is hot and is collected in the drip tray
underneath. Avoid contact as it splashes around.
3. After rinsing, the appliance will return to the standby.
20 / EN
will goes off. Then the appliance will continue the self-
and the mild espresso button
will light up indicating that the empty system is under
and the hot water button
, the strong espresso button
and self cleaning button
together.
and the mild espresso button
Fully Automatic Coffee Machine / User Manual
will flash.
together for 5 seconds.
will then