Cleaning Mode - Toto TLP01701U Manuel D'installation Et D'utilisation

Normal mode
Hold your hand on the side sensor to switch water
temperature from HOT to COLD and COLD to HOT.
2
Mode ajustment
GB
Continuous water spouting mode
Water comes out when you trigger the sensor by holding out your hands.
Modo de ajuste
ES
After 3 seconds of use, the water will remain on for a duration of 1 minute.
Ajustement du mode
FR
To stop the water, trigger the sensor a second time.
Ajuste do modo
PT

Cleaning mode

This mode prevents the water from coming out while you clean the lavatory.
Activate by holding your hand over the sensor for 10 seconds the LED indicator
on the spout will turn off for 5 seconds, keep your hand on the sensor while it is off.
Afterwards, no water will come out for 1 min. Afterwards, triggering the sensor
will cause water to come out as usual.
Cold water priority mode
After one (1) minute of inactivity, faucet resets to "Cold Water Setting".
Equipment protection wash
When the product is not used for 24 hrs, water will come out automatically
for 5 seconds to protect the lifespan of the automatic faucet.
Continuous water spouting mode
3sec
Cleaning mode
10-15sec
MODE ADJUSTMENT
60sec
60sec
-6-
10
.