Starting Up And Functions - Hornbach 10530794 Mode D'emploi

8. Make sure that a space of at least 20 cm is kept between the bottom of the heater and the floor
when the appliance is installed.
Floor-standing position
1. Put both feet on the floor and make sure that both slots are positioned
parallel to each other. Now insert the panel in the slots provided on the
feet, keeping a distance of at least 12 cm to the outer edge.
2. Now use the supplied screws to screw the panel to the feet.

Starting up and functions

1. Insert the power plug in the power socket.
2. Press the main switch (I): The light will illuminate and the appliance is now set to standby mode.
3. Now press the ON/OFF button: the heater will start operating. The room temperature is shown
on the display.
4. The appliance can be connected to the app when the blue Wi-Fi control lamp flashes. If you do
not want to operate the heating panel with the app, you can switch off this function (and thus also
the flashing blue light). Press and hold the ON button. The blue light will now go out. Press the
ON/OFF button again to switch on the Wi-Fi function. The blue light will flash again.
149