Dyna-Glo DGX440SGN Mode D'emploi page 23

Care and Maintenance
Grill Burner Assembly
Removing The Burner Assembly
1. Make sure all control knobs are in the OFF
position, gas supply valve is closed, and the
gas hose is disconnected from the gas supply.
2. Open grill lid and remove warming rack,
cooking grates, and heat tents as shown in
Figure 1.
3. Remove hinge pin as shown in Figure 2.
4. Slide burners out of firebox.
5. Detach ignition wire from electrode in Figure 3.
Figure 1
Figure 2
Figure 3
23