Philips AJ3430 Mode D'emploi page 6

CONTROLS
1 SLEEP/ RADIO ON
– displays/ adjusts/ switches off sleep time
– switches on radio; displays radio frequency
2 SET control
– sets the times for •ALARM 1, •ALARM 2, •TIME
and to run on •CLOCK time
: HR, MIN and 7, 8
3 /
TIME SET TUNING
– adjusts the hours (7) and minutes (8)
for clock/ alarm times
– tunes (up 7, down 8) to radio stations
4 ALARM 1 - RADIO and also PRESET 1
– selects radio mode on or off for alarm 1
– station 1
PRESET
5 ALARM 2 - BUZZER and also PRESET 2
– selects buzzer mode on or off for alarm 2
– station 2
PRESET
Environmental information
We have reduced packaging to the minimum for easy separation into two materials: cardboard (box) and polyethylene (bags,
protective foam).
Your set consists of materials, which can be recycled if disassembled by a specialized company. Please observe
the local regulations to dispose of packing materials, dead batteries and old equipment.
6
6 ALARM RESET/ RADIO OFF
– stops the active alarm for 24 hours
– stops radio /sleep function
7 PRESET 3, 4 and 5
– stores and selects preset stations
8 REPEAT ALARM/
BRIGHTNESS CONTROL
– switches off the alarm for a 9 minute period
– changes the brightness of the display illumination
– switches off sleep function
9 Display
– shows the clock/ alarm times and status of the set
0 BAND
– selects FM/ AM waveband
! VOLUME
– adjusts the sound level
@ Power cord
– for AC power supply and to improve FM reception
The type plate is located on the bottom of the set.