Cleaning & Maintenance; Spare Parts; Disposal Information - Renfert TOP spin Guide De Démarrage Rapide

Cleaning / Maintenance
Inside the extractor there are small parts which require maintenance.
Opening the device, other than for the processes described below, is not permissible!
en
Clean the unit using only a damp cloth.
Do not use any scouring cleaning agents or those containing solvents.
Emptying the Dust Drawer
⇒ Lift the work table up as far as it will go
⇒ Brush the dust residues into the Dust Drawer or remove them by
knocking gently (4), and pull the Dust Drawer out by its lower
edge.
⇒ Empty the Dust Drawer.
⇒ First insert the upper part of the Dust Drawer into the housing and
then press the lower part in.

Spare parts

You can find components subject to wear and the spare parts on the spare part list in the internet at
www.renfert.com
The components excluded from the warranty (such as consumables or parts subject to wear and tear)
are marked on the spare part list.

Disposal Information

Within the European Union, units with this symbol should not therefore be disposed of in unsort-
ed domestic waste.
Please contact your local authorities for more information on proper disposal.
4
- 4 -
Subject to change