Securing The Child - Diono Cambria 2XT Manuel D'instructions

SECURING THE CHILD

WARNING! Use ONLY the vehicle's lap and shoulder
belt system when restraining the child in this booster
seat. DO NOT
1. Properly position child into
installed seat. The child should be
sitting upright and seated all the
way back in the booster seat.
2. Adjust head support to proper height: The shoulder
belt guide should be slightly above the child's shoulders
(at least 1 in / 2.5 cm). Squeeze the head support
adjustment lever on the back of the booster seat while
adjusting it's height up or down to fit the child.
3. Feed the shoulder belt portion of the vehicle seat
belt through the shoulder belt guide.
2
IMPORTANT:
completely through the shoulder belt guide and not fall
off the child's shoulder.
22
use a lap belt only!
1 in
2.5 cm
The vehicle shoulder belt MUST route
Cambria® 2XT
1
3