SEVERIN AT 2509 Mode D'emploi page 10

by turning the adjustable browning control
knob.
Light: turn the control knob anti-clockwise.
Dark: turn the control knob clockwise.
In the case of sliced bread specifi cally
intended for toasting, we recommend a
browning control setting of 3 to 4.
Operation
– Insert the plug into the wall socket.
– Aft er adjusting the browning control,
insert the bread into the toast slot and
press the operating lever down. Th e
indicator lamp will go on.
– Once the desired degree of browning
is reached, the toaster switches off
automatically; the slices are ejected, and
can be removed once the indicator lamp
goes off .
– To achieve regular browning when
toasting several slices in succession,
allow the toaster to cool down for 60 - 90
seconds aft er each cycle.
 Do not cover the toast slot during
operation.
Defrost function
Th e defrost function may be used in addition
to the normal action when toasting deep-
frozen bread. Th is will extend the toasting
process. Th is function is shown by the
indicator lamp.
Warm-up function
Th e warm-up function is suitable for re-
heating bread which has already been toasted.
Caution: do not warm up buttered bread.
Aft er activating the toasting function, the
warm-up function can be used in addition.
Th is function is shown by the indicator lamp.
Interrupting the toasting cycle
If you want to interrupt the toasting cycle,
press the eject button. Th e toaster will switch
off and the slices are ejected.
Warming up rolls, buns etc
– To warm up buns, rolls or other bakery
items, push the slide control operating
lever for the warming top down to raise
the bread roll holder.
– Place the items to be warmed up on the
top, adjust the browning control to a
medium setting and then push down the
operating lever to switch on the toaster.
– Once the browning cycle is complete and
the appliance has automatically switched
off , turn the roll or bread over and repeat
the cycle.
– Aft er use, return the bread roll holder
to its rest position by pushing the slide
control back up.
 Do not place the items directly on the
toast slot.
General Care and Cleaning
 Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
 To avoid the risk of electric shock, do not
clean the toaster with water and do not
immerse it in water.
 Do not use abrasives or harsh cleaning
solutions.
– Th e housing may be wiped with a dry or
slightly damp lint-free cloth.
Crumb tray
During use, any bread crumbs falling down
are collected in the crumb tray. To empty
the tray, pull it out sideways. Make sure to
replace the crumb tray before the toaster is
used again.
Power cord storage
Unwind the power cord completely before
operation and make sure it is kept well away
from the appliance.
Allow for a suffi cient cooling-down period
before winding up the power cord aft er use.
10