Rear Panel Features - WBOX Technologies CLASS D 100W Mode D'emploi

Rear Panel Features

1. INPUT - Two, RCA jacks. Stereo or mono audio sensing line level audio input. 0E-
A100 will turn ON when a line level audio signal is present on either jack. Amp will
turn OFF after 15 minutes of no audio signal.
2. TRIGGER - One, 3.5mm mini jack. Connect to the DC voltage Control OUT on an
amplifier, AV Receiver or other audio processor to automatically turn the 0E-A100
ON/OFF. When DC voltage is applied, the 0E-A100 will turn ON. When DC voltage
is removed, the 0E-A100 will turn OFF. RANGE: +12 to +24V DC. POLARITY: Tip:
+VDC, Sleeve: GND.
3. SPEAKER OUT - Two, gold spring push terminals. Connect to a passive subwoofer
or a powered sub with speaker level input.
4. 110/220V - One, switch. Select either 110V-120V or 220V-240V as appropriate for
local AC line voltage. Please confirm local voltage prior to use or making changes to
the setting.
5. POWER - One, switch. Set to ON position to turn power to the amp ON. Set to OFF
position to turn power to the amp OFF.
6. AC MAINS - One, three-prong socket. Use the supplied 3-pin ground power cable to
connect the unit to an external AC power supply.
All manuals and user guides at all-guides.com
1 2 3
INPUT SPEAKER OUT
L
TRIGGER
R
4 5 6
POWER
ON
OFF
AC INPUT
110-120V 60Hz;220-240V 50Hz 150W
FUSE:110-120V,T2AL/250V
FUSE:220-240V,T1AL/250V
7