Using The Fan; Cleaning And Maintenance - Inventum VST414C Mode D'emploi

4

using the fan

Place the pedestal fan on a flat, stable surface. Insert the plug in a socket.
Switching on/off
Turn the position button to position 1 to 3 to switch on the fan. By turning the position button back to 0, you switch off the appliance.
Position 0 = off
Position 1 = lowest position
Position 2 = middle position
Position 3 = highest position
Oscillation
This fan is able to oscillate (swerve to the left and right) for a better air displacement. Press in or pull out the oscillation knob.
If you want to change the wind to an upward or downward direction, you can simply tilt the fan head upwards or downwards.
Adjusting the height of the pedestal
In order to adjust the height, loosen the pedestal adjusting nut and move the fan upwards or downwards. Properly hold on to the fan
when loosening the pedestal adjusting nut, so it cannot drop down unexpectedly. Re-tighten the pedestal adjusting nut when the fan
is at the required height.
5

cleaning and maintenance

Before cleaning the fan, you must switch it off by means of the on/off button and remove the plug from the socket.
• Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
• Make sure the wooden parts of the pedestal do not get wet.
• If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Never submerge the fan in water or any other liquid.
English •
15