American Standard Ultima 6147 Serie Instructions D'installation page 2

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure
that your installation proceeds smoothly--please read these instructions carefully before you begin.
UNPACKING
Remove the Flush Valve items from the carton. The illustration below shows all items
after they have been removed from the carton. Some items may be packaged partially
assembled to other items.
1. Flush Valve Assembly
2. Vacuum Breaker Assembly for Toilet
2a. Vacuum Breaker Assembly for Urinal
3. Spud Coupling Nut and Washers for Toilet
3a. Spud Coupling Nut and Washers for Urinal
4. Spud Flange for Toilet
4a. Spud Flange for Urinal
CARE INSTRUCTIONS:
DO: CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
1
2
3
4
All American Standard Products Are Water Tested At Our Factory.
Some Residual Water May Remain In The Valve During Shipping
7
2a
3a
4a
2
5. Sweat Solder Adapter
6. Cover Tube
7. Wall Escutcheon
8. Supply Stop
9. Installation Instruction
6
5
8
MANUAL FLUSH VALVE
Toilet, Urinal & Clinic Sink with Manual
Operation Flushometer
Toilet
OPERATING PRESSURE:
25 psi (flowing)-80 psi (static)
FLOW REQUIREMENT:
25 gpm (94.6 L/min.)
9
Certified to comply with:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
NOTE TO INSTALLER: Please give this manual to the customer after installation.
To learn more about American Standard Products visit our website at: www.americanstandard-us.com
or e-mail us at: CRTTEAM@lixilamericas.com
For Parts, Service, Warranty or other Assistance,
please call (844) CRT-TEAM / (844) 278-8326 (In Canada: 1-800-387-0369)
© 2018 AS America Inc.
!!! IMPORTANT !!!
WHEN MOUNTED ON AN ADA ACCESSIBLE
BOWL, THE ROUGH-IN TO THE SUPPLY INLET
SHOULD BE NO HIGHER THAN 37-1/2" OR THE
HANDLE WILL EXCEED MAXIMUM HEIGHT
ALLOWANCES UNDER ADA GUIDELINES.
MODEL NUMBERS
6147 SERIES
6145 SERIES
Urinal
OPERATING PRESSURE:
20 psi (flowing)-80 psi (static)
FLOW REQUIREMENT:
10 gpm (37.9 L/min.)
(In Toronto Area only: 1-905-306-1093)
M965874 Rev. 1.1 (1/19)
M965874 Rev. 1.1 (1/19)