Scheduled Maintenance Table - Nilfisk SW4000 Instructions D'utilisation

SCHEDULED MAINTENANCE TABLE

Procedure
Battery charging
Battery (WET) fluid level check
Side and main broom height check
Brake cable check and adjustment
Hopper dust filter check and cleaning ("A" method)
Hopper hydraulic lifting system oil level check
Skirt height and operation check
Dust guard system water filter check and cleaning (optional)
Hopper dust filter check and cleaning ("B" method)
Filter shaker operation check
Main broom driving belt check
Steering chain cleaning
Safety system operation check
Brake pad check/adjustment/replacement
Hopper dust filter check and cleaning ("C" method)
Main broom driving belt check and/or replacement
Hopper gasket integrity check
Lifted hopper sensor operation check/adjustment
Motor carbon brush check and/or replacement
Hydraulic system oil change
(*) For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more frequently if the machine is used on slopes.
(4) Or more often in dusty areas.
(5) Change the hydraulic system oil after 500 hours or every year.
03/2013
INSTRUCTIONS FOR USE
Upon delivery
(1)
1464809000 - SW4000, FLOORTEC R 870
Every Every Every
10 50 100
hours hours hours
(2)
(3)
(4)
(2)
(4)
(*)
(*)
(*)
(2)
(*)(3)
ENGLISH
Every
Every
200
year
hours
(4)
(*)
(*)
(*)
(*)
(*)(5)
19