General Information; Safety Information / Accident Prevention Warnings; Transport, Handling And Intermediate Storage - Sulzer SKS Manuel D'emploi Et D'entretien

EN
- Translation of the original instructions

1. GENERAL INFORMATION

Before performing any operation on the machine, it is indispensable that you be completely familiar with the entire use and maintenance
manual. The manufacturer declines all responsibility for improper use of the product, for damage caused following operations not
contemplated in this manual or unreasonable interventions. Instructions and limitations contained in this manual are in reference to
standard models. For all other versions and all other situation non contemplated in the manual you should contact the technical service.
2. SAFETY INFORMATION
This symbol indicates that failure to comply
warnings entails the
risk of damage to people and / or things
Failure to heed the instructions will result in::
The loss of warranty;
•
Various types of risks (electrical, mechanical, thermal, chemical etc ...) for persons;
•
Risks of damage to equipment and plant;
•
Risks arising from failure or incorrect operation of the equipment;
•
Environmental risks.
•
Each transport, installation, connection, setting at work, control and eventual maintenance or stop operation
•
shall be executed by trained and qualified staff. Furthermore, possible local regulations or directions not
mentioned in this manual must be taken into consideration as well.
The task of the plant manager is to assign to a sufficient qualified personnel the operations listed in this
•
manual, indicating activities and responsibilities.
The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities,
•
or lack of experience and knowledge, unless they have been given supervision or instruction.
Install the electric pump so as to avoid accidental contacts with people, animals or property.
•
It is forbidden to use the pump / electric pump in case of damages or anomalous operations.
•
Tampering with the product is prohibited.
•
The user is responsible for dangers or accidents in relation to other persons and their property: it must be
•
taken all the necessary precautions to avoid risks or consequent damages to the inadequate or inefficient
operation of the product.
Use the pump / electric pump only for the purposes described in Paragraph 4. Any other use can be a cause
•
of accidents.
Verify the conformity of the product to the local prescriptions in force.
•
Use, during any operations, the necessary individual devices of protection:
Protective glasses
•
Protective gloves for mechanical , electrical, thermal and chemical risks
•
Before executing any operation, the feeder cables shall be disconnected.
Never touch the electric pump while it is working.
The pumps are capable of operating properly with no problems only if the installation is correct and the
•
required maintenance is guaranteed. Carefully follow the instructions of this manual.
•
relevant National and Local Regulations in force regarding safety, during transport, installation, electric
connection, installation, operation and eventual maintenance or demounting.

3. TRANSPORT, HANDLING AND INTERMEDIATE STORAGE

RECEIVING THE PRODUCT
When receiving the product it is necessary to verify that:
• During the transportation it have not restored damages: in case of damages, even if exterior, write a note of reserve on the
documents of transportation and inform the conveyor.
• The supply correspond to the order: in case of deficiencies, write a note of reserve on the documents of transportation and inform
the conveyor.
This symbol indicates that failure to
comply warnings entails electrical risk
Use the pump/group only when in perfect condition and correctly assembled. Must also be applied to the
WARNING!
Failure to comply with instructions may result
in damage to the pump or to the system.
21