Melitta Caffeo SOLO Guide D'utilisation page 78

13 Press the button for steam dispensing
descaling programme.
→
Phase 2 is completed.
Phase 3
During Phase 3, three bean symbols
→
Water flows out of the steam pipe into the coffee grounds container. The
symbol for the valve
for the valve
14 turn the valve switch anticlockwise to close the valve.
→ Water flows inside the appliance into the drip tray. Subsequently, the symbol
for the drip tray
15 empty the drip tray and then re-insert it with the coffee grounds contain-
er.
→ the Integrated Descaling programme is complete.
the standby symbol
appliance is ready for operation.
16 Re-insert the Melitta
76
flashes during this process. Subsequently the symbol
will be illuminated.
will be illuminated.
will be illuminated after a brief heat-up phase. the
claris water filter into the water reservoir.
® ®
to continue with the integrated
are shown on the display.