What To Do If; General Conformity Declaration - Becker Centronic SunWindControl SWC411 Notice D'utilisation

Problem
Drive is not functioning,
transmission control
light is not lit.
Drive is not functioning;
transmission control
light is illuminated.
Transmission control
light is fl ashing.
Automatic control
commands are not
executed.
The system is not
extended automatically
when the sliding switch
is set to "".
The system does not
extended manually
when the sliding switch
is set to "" or "".

General conformity declaration

The company BeckerAntriebe GmbH hereby declares that the Centronic Sun-
WindControl SWC411 in conformity with the basic requirements and other rel-
evant provisions of Directive R&TTE 1999/5/EC.
For use in the following countries: EU, CH
Subject to technical changes without notice.

What to do if ...?

Cause
1. Batteries are dead.
2. Batteries are incor-
rectly inserted.
1. Receiver outside the
radio range.
2. SWC411 is not
programmed in the
receiver.
Batteries are running out. Insert new batteries.
Sliding switch not in the
"" position.
1. Sunlight intensity is
below the threshold
value.
2. Wind speed exceeds
threshold value.
Wind speed exceeds
threshold value.
Remedy
1. Insert new batteries.
2. Insert batteries cor-
rectly.
1. Reduce distance to the
receiver.
2. Programme SWC411.
Set sliding switch to the
"" position.
1. Adjust sun threshold
value.
2. Wait until wind abates.
Wait until wind abates.
DE
GB
FR
NL
19