Riello Burners F10 Manuel D'entretien page 10

DIMENSIONS
Flange
189
140
170
MOUNTING THE BURNER
It is necessary that the two insulating
gaskets (10, fig. 1) are placed between
the boiler door and the burner flange.
These insulating gaskets have six holes,
which, if necessary, can be modified as
shown on the drawing on the right.
Verify that the installed
burner is lightly leaned
towards the button.
(See figure 2).
The burner is designed to
allow entry of the flexible
oil-lines on either side of
the burner.
2359
All manuals and user guides at all-guides.com
305
=
D5242
Fig. 2
D5572
2 GB
Burner
=
BURNER FIXING AND
HINGE ASSEMBLY
104 265
44
D5397
S7385