Atag KA2111DC Notice D'utilisation page 141

setting up your side-by-side
refrigerator
Remove any residual matter inside the purifier. (Model with the purifier)
- Open the main water tap to check whether water
is running through the water tube on the water inlet
side of the purifier.
- If water does not come out through the line, check
whether the tap is open.
out and any residual matter that built up during
manufacturing has been removed.
Attach the purifier lock-clip.
- Hold the purifier lock-clip in the appropriate position
where to screw.
Secure the purifier in position.
- Fix the purifier in position, as shown in the figure on the right.
Connect the water line to the refrigerator.
- Remove the compressor cover of the refrigerator.
- Connect the water line to the valve, as shown in the figure.
If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.
Secure the water line.
CONNECTION NUT
INSTRUCTIONS
_21
setting up