Atag KA2111DC Notice D'utilisation page 131

setting up your side-by-side
refrigerator refrigerator
2. Removing the freezer door
eful not to pinch the water tubing and wire harness on the door.
disconnect the wires by gently pulling them apart
2. Remove hinge screws
the upper hinge
5
3. Next, remove the door from the lower hinge
7
6
4. Remove the lower hinge
1
3
and the ground screw
5
. Be careful that the door does not fall on you as you are removing it
4
3
8
using a hex wrench.
1
using a screwdriver, and then
2
.
2
4
by turning counter-clockwise, and take off
6
by carefully lifting the door straight up
Be careful not to pinch
the water tubing and
wire harness on the
door.
7
.
_11
setting up