Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
Mount camera at least 2 inches
above or below running lights.
Close proximity to lights may
cause image blooming, blurring
and reduced night vision
performance.
The area should be flat with
enough surface area to
accommodate the bracket.
The surface area should be
clean and dry for a watertight
installation.
Ensure that power can be fed to
the installation area from within
the vehicle.
Camera
15
More information https://www.caravansplus.com.au
Camera Installation
1. Select a suitable mounting
position where you are going
to install the doorway camera.
Mark a basic outline using the
provided bracket gasket. (Fig. 1)
Fig. 1
2. Drill a ⁄ " center hole on the
vehicle wall using a ⁄ " hole
saw. (Fig. 2)
Camera
"
Fig. 2
Publicité
Table des Matières
Dépannage
