ASROCK K10N780SLIX3-WiFi Manuel D'instructions page 31

How to install eSATAII?
SATAII_6 (PORT5)
1. In order to enable the eSATAII port of the I/O shield, you need to connect the
orange SATAII connector (SATAII_6 (PORT5); see p.2 No.16) and the eSATAII
connector (eSATAII_TOP; see p.2 No.38) with a SATA data cable first.
Connect the SATA data
cable to the orange
SATAII connector
(SATAII_6 (PORT5))
2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port of
the I/O shield according to the eSATAII connector that you connect the SATA
data cable.
Connect one end of the eSATAII
device cable to eSATAII device
ASRock
Connect the SATA
data cable to the
eSATAII connector
(eSATAII_TOP)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
K10N780SLIX3-WiFi Motherboard
eSATAII_TOP
3 1 3 1 3 1
3 1 3 1