Mts Broadcast / Tv Stereo System - Panasonic PV-20DF64-K Mode D'emploi

MTS Broadcast / TV Stereo System

DISPLAY
AUDIO
Equipped with
for true MTS reproduction.
Reduction is required for good stereo
separation and audio fidelity.
registered trademark, and is licensed by
Technology Licensing.
Audio Mode for TV Viewing
Press AUDIO to select the desired audio
mode as described above. (Arrow shows
selection.)
• Each press of
AUDIO will change
the audio mode as
shown below.
• "SAP" is selected
with first press of
AUDIO.
24
All manuals and user guides at all-guides.com
-TV Noise Reduction
-TV Noise
is a
< Example >
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
Receivable Broadcast Types
The following are possible audio broadcast
types and on-screen displays. The signal
being received is indicated with a "
while the selected audio mode is indicated
with an arrow. To change the audio mode for
these broadcasts, see the "Audio Mode for
TV Viewing" section.
Press DISPLAY to display the broadcast
signal being received.
MTS Stereo broadcast:
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the display
flickers, select MONO audio mode for possible
improvement.
SAP broadcast:
Secondary Audio Program (sub language).
Select SAP audio mode for the sub
language.
MTS Stereo and SAP broadcast:
Multi-channel Television Sound Stereo (main
language) and Secondary Audio Program
(sub language) broadcasts are being
received simultaneously. Select the STEREO
or SAP audio mode.
MONO broadcast:
Normal monaural sound broadcast.
" mark
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO