Additional Safety Warnings - Batavia MAXXBRUSH Mode D'emploi

English
better control of the power tool in unex-
pected situations.
f. Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g. If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. The use of these
pieces of equipment reduce hazards
caused by dust.
Power tool use and care
1.4
a. Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
b. Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
c. Disconnect the plug from the power
source before making any adjust-
ments, changing accessories, or stor-
ing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tools
operation. If damaged, have the power
tool repaired before use. Many acci-
dents are caused by poorly maintained
power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and
tool bits etc., in accordance with these
6
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from intended
could result in a hazardous situation.
Service
1.5
a. Please use a qualified expert who uses
original replacement parts to repair
your power tool. This will ensure proper
functioning of the power tool.

2. Additional safety warnings

Please read this manual carefully
and use the unit only according to
this manual.
• Always keep all labels on the device
clean and readable.
• Only use the device for domestic pur-
poses and in the way indicated in this
manual. The device is not designed for
continuous, professional use.
• Persons with limited physical, sensorial
or mental abilities are not allowed to
use the device, unless they are super-
vised and briefed for their safety by a
qualified person. Keep the device out of
reach of children.
• Never leave the device unsupervised
when in use.
• Please observe the corresponding
national regulations if you intend to use
the device on streets, paths, property
etc.
• Do not operate the device while third
parties are in the danger zone.
• The device is intended to be operated
on tarmac and paved surfaces. Do not
operate it on walls or ceiling.
• Dispose of used packaging material
carefully or store it out of the reach of
children. There is a danger of
suffocation!
• The unit is designed for operation in
altitudes of up to 2000 m above sea
level.
• Ensure a safety distance to other per-
sons or animals while working.