Sky Devices Platinum E5 Manuel De L'utilisateur page 4

Use only approved chargers, batteries and
cables. Unapproved chargers or batteries can
damage the battery or the device.
Connect the small end part of the charger to the
device's multifunction slot and the big end part
of the charger to an electric source.
If you connect the charger in a wrong way, you
can seriously damage the device. The warranty
does not cover damage caused by an
inappropriate use.
After charging is complete, disconnect the
device from the charger. Disconnect first the
charger from the device and then from the
electric source. Do not take out the battery
before disconnecting the charger. This can
damage the device.
The charger does not have ON/OFF button, so,
in order to cut the electrical supply, the end user
should disconnect the charger from the electric
source. Please keep the charging cable close to
the device when it is charging, to avoid it to be
tight. To save energy, disconnect the charger
when it is not in use.