Do not use attachment not recommended or sold by SKIL. Using attachments not
recommended may result in electric shock or fire.
Do not store battery pack in charger. Battery pack stored in charger over a long period of
time could lead to battery pack damage and fire.
Unplug charger from outlet before storage, attempting any maintenance or cleaning.
Such preventive safety measures reduce the risk of electric shock or fire.
Keep the battery charger clean by blowing compressed air on charger vents and wiping
the charger housing with a damp cloth. Contamination may result in electric shock or fire.
Replace battery pack if a substantial drop in operating time per charge is observed.
Battery pack may be nearing the end of its life.
To reduce the risk of injury, close supervision is necessary when an appliance is used
near children.
Do not use outdoors.
EXTENSION CORDS
WARNING
and electrical shock. If an extension cord is used, make sure:
a. The pins on plug of extension cord are the same number, size, and shape as those of plug
on charger.
b. The extension cord is properly wired and in good electrical condition.
c. The wire size is large enough for AC ampere rating of charger as specified below:
Length of Cord (Feet)
Size of Cord (AWG)
Extension Cord Chart for 220/240 Volt Tools:
0.75mm2 CORD
1.0mm2 CORD
d. An extension cord is a temporary solution. Move the charger to a standard receptacle as
soon as the job has been completed.
4
AN EXTENSION CORD SHOULD NOT BE USED UNLESS ABSOLUTE-
LY NECESSARY. Use of improper extension cord could result in risk of fire
25'
50'
18
16
50 Meters
75 Meters
100'
150'
16
14