Battery Test - EnergyFlo T2 Notice D'utilisation

． Operations and Tests
After connecting the tester to the battery, it will display the batteries voltage.
The Tester will display the following contents after pressing any key.

3.1 Battery test

Select Battery Type
Please select the battery type according to the battery specifications:
Regular Flooded (WET), Lithium Ion, AGM Flat Plate, AGM Spiral, Gel and EFB
Press the UP/DOWN keys to select battery type and press ENTER to confirm.
Battery System Standard and Rating
The battery tester will test the vehicles battery according to the selected rating.
Use UP/DOWN key to select the actual system standard rating marked on the battery.
CCA: Cold Cranking Amps, specified by SAE&BCI, most frequently used value for starting battery at 0°F (-18°C).
BCI: Battery Council International standard
CA：Cranking Amps standard, effective starting current value at 0°C
MCA: Marine Cranking Amps standard, effective starting current value at 0°C.
JIS：Japan Industrial Standard, displayed on the battery as combination of the numbers and letters, e.g. 55D23,80D26.
DIN：German Auto Industry Committee Standard
IEC：Internal Electro technical Commission Standard
EN：European Automobile Industry Association Standard
SAE: Society of Automotive Engineers Standard
GB：China National Standard
It takes around 3-5 seconds to display the battery test results. Please see the examples below.
Health:96% 490CCA
Charge:98%
Internal R=6.1mΩ
Rated: 500A
GOOD BATTERY
Health:78%
Charge:30%
12.64V
12.20V
Internal R=7.2mΩ
Rated: 500A
Health:39% 310CCA
Charge:20% 12.08V
Internal R=30.1mΩ
Rated: 500A
CHARGE & RETEST
440CCA
GOOD, BUT RECHARGE
Health:0%
Charge:20%
Internal R=45.2mΩ
Rated: 500A
BAD CELL，REPLACE
2
Main Menu
1.Battery Test
2.Cranking Test
3.Charging Test
4.Review Data
5. Print
6.System Setup
Battery Type
1.Regular Flooded.
2. Lithium Ion
3. AGM Flat Plate.
4.AGM spiral
5.GEL
6.EFB
Setting Rate
500
CCA
Health:46% 490CCA
Charge:80% 12.68V
Internal R=18.1mΩ
Rated: 500A
REPLACE
0CCA
10.64V
EN