2.
PERSONAL SAFETY PRECAUTIONS
WARNING! TO REDUCE THE RISK OF BURNS OR FIRE, FOLLOW THESE
SAFETY PRECAUTIONS:
2.1 DO NOT disassemble the work light; take it to a qualified service person when
service or repair is required. Incorrect reassembly may result in a risk of fire.
2.2 DO NOT crush, puncture, short external contacts or dispose of in fire or water.
2.3 DO NOT expose to temperatures above 140°F (60°C).
2.4 Replace the battery pack ONLY with one designed for this product.
2.5 Recycle or dispose of the used battery as required by local regulations.
2.6 If the electrolyte in the cells gets on your skin, wash thoroughly with soap
and water. If it gets into your eyes, rinse thoroughly with cool water and seek
immediate medical attention.
2.7 Pursuant to California Proposition 65, this product contains chemicals known to
the State of California to cause cancer and birth defects or other reproductive
harm. Wash hands after handling.
3.
SET UP INSTRUCTIONS
3.1 Remove any cord wraps and uncoil the cable between the charger and the work light.
4.
FEATURES
4
9
10
1
2
5
6
3
7
8
• 7 •
1. Horizontal magnets
2. Charging socket
3. Rotating (360°) hooks
4. Vertical magnet
ON/OFF power switch
5.
6. Charging status indicator
7. 10 SMD LED lights
8. 3W end LED
9. 12V DC accessory adaptor
10. 100V~240V AC wall charger