Introduction - Nussbaum POWER LIFT HF 3000 Manuel D'exploitation

ENGLISH

Introduction

Nussbaum products are a result of many years of
experience. A high quality standard and superior
concept guarantees you reliability, long lifetimes
and economical operation. To prevent unnec-
essary damage and hazards, read this operating
manual carefully and always comply with its con-
tents.
Any other use, or use beyond purpose is considered
improper.
The HYMAX lifts listed in this manual are identical in
construction to the listed Nussbaum lifts. This manual
applies to the following lifts:
POWER LIFT HF 3000 = HYMAX HF 3000
POWER LIFT HF 3500 = HYMAX HF 3500
POWER LIFT HF 4000 = HYMAX HF 4000
Otto Nußbaum GmbH & Co.KG is not liable for
!
any resulting damage. The operating company
alone carries the risk.
Proper use also includes:
• Adherence to all instructions in this operating
manual and
• Compliance with inspection and maintenance
work and the inspections stipulated.
• The operating manual is to be followed by all per-
sonnel working on the lift. This is notably with re-
gards to Section 4 "Safety conditions".
• In addition to safety information from the operat-
ing manual, comply with rules and regulations at
the location of use.
• Proper system handling.
Operating company obligations:
The operating company is obliged to only permit
personnel to work on the system who
• Understand the principle regulations about work
safety and accident prevention and who have
been trained in working with the lift.
• Have read the safety section and warning infor-
mation in this operating manual, have under-
stood it and confirmed learning with a signature.
Hazards in working with the system:
Nussbaum products have been designed and built
to state-of-the-art and to recognised safety stan-
dards. However, improper use may lead to hazards
to life and limb of the user or result in property dam-
age.
The system may only be operated
• For proper intended use.
• If it is technically in perfect condition.
Original Operating Manual
Organisational measures
• The operating manual is always to be kept ready
at the location of use of the system.
• Supplemental to the operating manual, refer to
and comply with generally valid legal and other
binding regulations for accident prevention and
for environmental protection.
• Check occasionally that personnel have an
awareness of hazards and safe work in compli-
ance with the operating manual!
• Use personal protective equipment as needed or
required by regulations.
• All safety and hazard information on the system is
to be kept in a legible condition!
• Replacement parts must meet technical specifi-
cations of the manufacturer. This is only guaran-
teed for original parts.
• Deadlines pre-set or given in the operating man-
ual for repeating tests / inspections must be fol-
lowed.
Maintenance work, error removal
Comply with pre-determined setting, maintenance
and inspection work and intervals in the operating
manual, including details for exchanging parts /
part fittings! These activities may only be done by
specialists who have participated in a special fac-
tory training.
Guarantee and liability
• In principle, our "General sales and supply condi-
tions" apply.
Guarantee and liability claims for personal and
property damage are excluded if due to one or
more of the following causes:
• Improper use of the system.
• Improper assembly, commissioning, operation
and maintenance of the system.
• Operating the system with defective safety de-
vices or improperly attached or non-functional
safety and protection devices.
• Non-compliance with information in the operat-
ing manual in terms of transport, storage, assem-
bly, commissioning, operation, maintenance and
fitting of the system.
• Independent construction changes to the system.
• Independent changes to ..... (e.g. drive ratios:
power, rotation speed, etc.).
• Improperly done repairs.
• Catastrophic cases due to foreign influences or
force majeure.