Stiebel Eltron HSBC 300 cool Utilisation Et Installation page 45

INSTALLATIoN
Installation
Electrical connection HSBC 3-HE
In the delivered condition, the 3 wires for connecting the auxil-
iary heating element are connected to a prefitted terminal and
earthing tab.
1 2
1 Terminal
2 Earthing tab
f Disconnect the 3 wires from the terminal and the earthing f
tab.
f Remove the terminal and earthing tab. f
f Connect the 3 wires to the auxiliary heating element as f
shown.
A BK / BN
B BU
PE GNYE
www.stiebel-eltron.com
Note
The auxiliary heating element standard delivery in-
cludes two identical wiring diagram labels for covering
"HSBC 3-HE (accessory X2.11)" on the wiring diagram:
- On the back of the front casing
- In these instructions (see chapter "Installation /
Specification / Wiring diagram")
f After installation of the auxiliary heating element, f
affix the wiring diagram labels in the corresponding
places.
f Wire up the auxiliary heating element (see chapter "Installa- f
tion / Electrical connection / Auxiliary heating element").
Setting HSBC 3-HE
1
5
1 Temperature selector for the auxiliary heating element
f Turn the temperature selector anti-clockwise as far as it will f
go to set the maximum temperature (80±5 °C).
HSBC 300 cool | HSBC 300 L cool |
3
1
45