AKASO BRAVE 7 Manuel De L'utilisateur page 17

EN EN
8. Auto Low Light: On/Off
Default setting is Off.
Auto Low Light mode will automatically adjust settings according to lighting
conditions to achieve the best low light performance. Even if you move back and
forth between bright and dark environments, you do not need to manually adjust
the camera settings.
9. ISO: Auto/200/400/800/1600/3200
Default setting is Auto.
ISO determines the camera's sensitivity to light, and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image. In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise, but darker images.
10. WDR: On/Off
Default setting is Off.
11. Language: English/Deutsch/Français/Español/Italiano/日本語/简体中文/繁體中文
12. Date Format: YYYY/MM/DD
13. Set Date: you can set the date of the camera.
14. Set Time: you can set the time of the camera.
15. Date Stamp: Off/Date & Time/Date
Default setting is Date & Time.
Turn on Date Stamp, this camera adds a date stamp to the videos and photos you
take.
16. Screen Saver: Off/1 Min/3 Min/5 Min
Default setting is 1 Min.
Screen saver helps to turn off the display after a period of inactivity to save battery
life. To turn on the display again, press any button or tap the screen on the camera.
15