AKASO BRAVE 7 Manuel De L'utilisateur page 16

Masquer les pouces Voir aussi pour BRAVE 7:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 82
EN
Note:
1. If you are recording a video, you must stop recording before issuing a new
command.
2. When controlling the action camera using voice commands,
• Please speak at a normal speed. No need to deliberately slow down.
• Please put stress at the end of the sentence.
2. Sounds: Volume/Key Tone/Touch Tone/Boot Tone
You can turn on or off these sound effects and adjust the volume of the camera in
this setting.
3. Distortion Calibration: On/Off
Default setting is Off.
Turn on Distortion Calibration, it can correct the image distortion.
4. Angle: 170°/140°/110°/70°
Default setting is 170°.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. 170° angle captures the largest amount of the scene,
while 70° angle captures the least.
5. Diving Mode: On/Off
Default setting is Off.
Turn on Diving Mode, it can compensate for the lack of red light in underwater
scenes. Diving Mode is designed to be used in tropical and blue water, optimized for
use between 10 and 80 feet.
6. Remote Control: On/Off
Default setting is Off.
Turn on this setting on the camera, then turn on the included remote, you can
control the camera using the remote.
7. Wind Noise Reduction: On/Off
Default setting is off.
Turn on Wind Noise Reduction, it can lower the noise to an acceptable level.
14

Publicité

Table des Matières
loading

Table des Matières