JVC DLA-RS1 Manuel D'instructions page 25

Setting Menu
Item values shown in
Items that can be configured differ according to the input signals.
Image>Image Adjust
A
Contrast
Adjusts the contrast of the projected image.
(Black) b30 to 30 (White)
B
Brightness
Adjusts the brightness of the projected image.
(Darken) b30 to 30 (Brighten)
C
Color
Adjusts the colour density of the projected image.
(Lighten) b30 to 30 (Darken)
D
Tint
Adjusts the hue of the projected image.
(Red) b30 to 30 (Green)
E
Sharpness
Adjusts the outline of the projected image.
(Soft) b30 to 30 (Sharp)
F
DNR
Adjusts the strength of noise removal of the projected image.
(Weak) 0 to 30 (Strong)
AContrastB, ABrightnessB, AColorB and ASharpnessB can also be configured from the remote control. (pP12)
ATintB can only be adjusted when NTSC signals are input to the video or S-video input terminal.
Image>Color Temp.
G
Color Temp.
Sets the colour temperature of the projected image.
Low
Middle
High
User10
User20
* The red, green and blue colours can be adjusted and registered respectively.
This setting can also be configured from the remote control. (pP12)
are factory settings.
Select this to give a reddish tinge to the image.
Select this to have a balanced image.
Select this to give a bluish tinge to the image.
(Less red) b255 to 0 (More red)
Red
(Less green) b255 to 0 (More green)
Green
(Less blue) b255 to 0 (More blue)
Blue
(Less red) b255 to 0 (More red)
Red
(Less green) b255 to 0 (More green)
Green
(Less blue) b255 to 0 (More blue)
Blue
ENGLISH
25