CAME G4040EZ Manuel D'installation page 54

Delete all users.
A 1 Set boom type
To define the type of boom.
⚠ The choice of boom limits some of the speed, slow-down and calibration parameters. This is so as to ensure that the operator functions
correctly.
A 2 Motor test
To check that the gearmotor rotates in the right direction (see MOTOR TEST).
A 3 Travel calibration
Automatic calibration of the boom travel (see the section TRAVEL CALIBRATION).
A 4 Parameter reset
Warning! The default settings are restored and the travel calibration deleted.
A 5 Manoeuvre count
This shows the number of manoeuvres performed (--- = 0 manoeuvres; 1 = 1,000 manoeuvres; 100 = 100,000 manoeuvres; ........... 999 =
999,000).
H 1 Version
It shows the fi rmware version.
Motor test
1. Select A 2. Press ENTER to confirm.
2. Select 1 to activate the test. Press ENTER to confirm...
3. ... (---) displays while waiting for a command.
4. Press and hold the button labelled with the arrow < and check
whether the operator opens.
 If the operator closes, invert the motor's phases (M with N).
0 = booms with a joint / 2 = boom 2 m / 4 = boom 4 m / 6 = boom 6 m / 8 = boom 8 m
0 = Deactivated / 1 = Activated
0 = Deactivated / 1 = Activated
0 = Deactivated / 1 = Activated
2
a
ESC < > ENTER
I
ESC < > ENTER
- - -
ESC < > ENTER
o P I
ESC < > ENTER