CAME G4040EZ Manuel D'installation page 42

Balancing the boom
Before proceeding, check that the spring you have chosen is suitable for the accessories and the clearance.
PASSAGE CLEARANCE (max. 3.75 m)
BOOM COMPOSITION
Boom with shockproof profile
Boom with shockproof profile and 001G028401
luminous cord
Boom with 001G0465 skirt
Boom with 001G028401 luminous cord and
001G0465 skirt
Boom with shockproof profile and 001G02808 swing
rest
Boom with shockproof profile, 001G028401 luminous
cord and 001G02808 swing rest
 The boom includes the transparent groove cover and end cap.
⚠ WARNING!
001G02802 cannot be used on barriers with booms fitted with the 001G0465 skirt or 001G02808 swing post
001G02808 for clearance widths of up to 3 m.
001G02807 MUST be used with clearance widths exceeding 3 m.
001G0465 - 001G02808 cannot be used together.
Release the gearmotor and position the boom vertically . Lock the gearmotor again.
Screw the eyelet rod on the end of the spring . Screw the spring on the rod fixed to the lever arm .
1
A
001G02040 Ø 40 mm spring
1.5 to 1.75
A
A
A
A
A
A
B
001G04060 Ø 50 mm spring
1.75 to 2.25 2.25 to 2.75
A A
A B
B B
B B
B B
B B
C
001G06080 Ø 55 mm spring
2.75 to 3.25 3.25 to 3.5
B B
B B
C C
C C
C
C
3
2
3.5 to 3.75
C
C