Package Content - V-TAC VT-1014 Instructions D'installation

PACKAGE CONTENT

Micro USB
Charging Cable
Rechargeable
Table Lamp (1PC)
FEATURES
1. Touch control, Three steps dimming, and Three
modes for CCT.
2. Using advanced LED technology, soft light
without dazzle and designed with anti radiation and
eye protection.
3. Memory function for brightness and tempera-
ture.
4. Sleek and stylish folding design rechargeable
table lamp.
3 STEP
3 MODES
BUILT-IN
DIMMING
CCT
BATTERY
OPERATION GUIDE
1. Touch button mode - To switch on the lamp
tap on the button as shown in fig 1. By pressing the
touch button repeatedly you can switch the light
brightness level and turn off the light. Circulation of
the light pattern by using the touch button is
"minimum light, medium light, maximum light, and
power-off"
2. Changing color by using touch button - Make
sure the light is ON, tap on the touch button and
hold for 2 seconds for the light to change the color
temperature. Circulation of the light changing
pattern is "warm-light, cold-light, and natural-light"
3. When the light is on at any temperature for more
than 20 seconds and if you tap on the touch button
the lamp will switch off. When turning on the lamp
next time, the light brightness level and tempera-
ture will be the same as the last setting.
FIG 1
EN EN INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION
Instruction
(1PC) Manual (1PC)
EYE ANTI-
PROTECTION
RADIATION
OPERATION CAUTIONS:
1. Please do not put the lamp on high temperature
surfaces, and do not use it in flammable or humid
environment to avoid the breakdown, short circuit
etc.
2. The adapter must be under the specialized range.
3. Place the base of table lamp on steady base while
adjusting the arm.
4. The lamp head of the table lamp can be adjusted
up to certain angle only. Be careful not to overturn
the lamp head beyond the adjusting angle in order to
avoid any damage to the lamp.
MAINTENANCE
1. Please clean the lamp once in every two months to
keep it smooth and bright.
2. Use cleaning cloth and water to clean the dust
3. For filthy marks, please use cleaning cloth and
soapsuds.
4. Please do not clean the lamp by high-volatility and
high-corrosive liquid which can lead to discoloring or
damaging the lamp.
PARTS INDICATOR
LIGHT GUIDE PANEL
HEAT EMISSION HOLE
COMPOUND [TOUCH] BUTTON
/ ADJUSTING BRIGHTNESS
AND TEMPERATURE
ADAPTER SOCKET