GreenWorks Commercial GN 220 Manuel Du Propriétaire page 15

All manuals and user guides at all-guides.com
ASSEMBLY INSTRUCTION
INSTALLING THE CHUTE (See Figure 4)
• Align the grooves of the discharge chute (1) with the slot on the chute housing.
• Push the discharge chute into position.
• Tighten the discharge chute screws (2) with a Phillips head screw driver to lock the discharge
chute.
NOTE: Never operate the snow thrower without the complete discharge chute in place.
Groove of the
chute
1
Slot on the chute
housing
14
2
Fig. 4