Power Fist 8154700 Mode D'emploi page 8

Chapter 2
Step 3: (See fig. 2-5) Open the wire-feed impaction component (C).
Thread the wire through the tube. Feed the wire up through the tube
on the welding torch. Close the wire-feed impaction
component (C), and adjust the impaction nut of the wire-feed wheel.
Step 4: Close the right side panel.
2.3.5 Installing the power plug (plug and power cord required for 8154700).
Note: this step must be done by a qualified electrician. Connect a 25A power plug
(8154718: 230 VAC, 25A) to the line cord. Green wire = ground wire.
2.3.6 Fixing the face shield (fig. 2-6).
Assembly
Ground: Green
Neutral: White
Hot: Black
Black
White
Green
Fig. 2-6
Page 7
C
D
Wire-feed mechanism
Fig. 2-5