Dyna-Glo DGB730SNB Mode D'emploi page 9

Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 9: Place the heat shield (7) into the cart rear vertical beam (10),
9
as illustrated on below magnifying figure B. Secure heat shield
(7) to the cart front vertical beam (8, labeled as AA) by using two
M4x12 screws (D), secure heat shield (7) to cart rear vertical
beam (10, labeled as CC) by using two M4x12 screws (D).
Hardware Used
D M4x12 Screw Qty: 4 pcs
12