Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Step 11: Remove preassembled two M6x12 screws (A) and door
handle sleeve (18) from the door handle. Insert the 2 door
sleeves (18) into the holes located on the back of left door
assembly (15), insert two M6x12 screws (A) into the door
handle sleeve (18), through the door handle bezels (17) and
into the thread holes in the door handles. Tighten the
screws. Repeat with right door assembly (14).
Hardware Used
A
M6x12 Screw
(Pre-assembled in cabinet door handles)
Step 12: Insert the bottom hinge pin of left door assembly (15) into
the hole (labeled as AA) on bottom shelf (1). Press the
hinge pin on the top of left door assembly (15) by hand
and insert into the hole (labeled as BB) of upper front
brace (11). Repeat the same with right door assembly (14).
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Qty: 4 pcs
14
11
12
AA
1
Hinge pin on the
top of the door
BB
11
Publicité
Table des Matières
