Troubleshooting Table - Kohler K-10950 Mode D'emploi

AC Models Only
5. Installation Checkout
IMPORTANT! Connect the connectors with the arrows pointing
directly toward each other.
If installing the AC version, connect the valve cord to the AC
power supply.
Plug the power cord into the appropriate outlet.
Use the aerator key provided to remove the aerator. Clean any
debris from the aerator screen and reinstall.
Check for leaks with and without the water running.
6. Troubleshooting

Troubleshooting Table

Symptoms Probable Causes
1. No water A. There is a
flow (DC).
Kohler Co.
To
Faucet
Connect with the arrows
Important:
pointing toward each other.
Recommended Action
A. Remove the spout and
loose check the connection from
connection. the battery to the solenoid
and from the solenoid to
the sensor. Make sure that
the connector arrows are
aligned and that the
connection is secure. Refer
to the Maintenance Guide.
9
To Power
Supply
1025498-2-E