Cleaning Wall Surfaces; Troubleshooting; Care And Maintenance - Top Craft 2004 Manuel D'instructions

Caution
Do not run over free-standing corners!

Cleaning wall surfaces

Fasten the surface cleaner directly to the
high-pressure gun.
Caution
Always hold the surface cleaner at the han-
dle while cleaning the walls.
Adjusting the cleaning performance
Robust surfaces (for e.g. tiles, concrete,
stone)
Set the height adjustment of the noz-
zles to "+".
Sensitive surfaces (for e.g. wood)
Set the height adjustment of the noz-
zles to "–".
All manuals and user guides at all-guides.com

Troubleshooting

This chapter provides you with information
that enables you to eliminate a number of
malfunctions or faults that might occur. For
more information, please contact our
SERVICE HOTLINE.
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
High-pressure cleaner does not build up
the pressure or is vibrating.
Dismantle the high-pressure nozzles,
check the high-pressure nozzles for
damage, rinse the surface cleaner with
clean water then reinstall the nozzles.

Care and Maintenance

Risk of injury
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
Care
Use a moist cloth and clean the appliance
after use.
Maintenance
The appliance is maintenance-free.
English 11