Positioning The Dhw Tank; Attaching The Bosch Solar Pump Station (Optional); Water Connections - Bosch WTS Serie Notice D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation
A
Fig. 8 Minimum wall clearances
[A]
2" (50 mm)
[B]
12" (300 mm)
[C]
20" (500 mm)

4.1.2 Positioning the DHW tank

B Lift the solar storage tank from the pallet and position it on a level floor
that has adequate load-bearing capacity.
B Tilt the solar storage tank slowly onto the pallet [1].
B Remove the hex bolts [2].
B Pre-assemble the storage tank feet [3] to approx. 3/4" (20 mm).
B Stand the solar storage tank upright at the installation location and
level it using the feet.
B Maintain minimum wall clearances.
Fig. 9 Installing the storage tank feet
[1]
Suitable surface (e.g. pallet)
[2]
Hex-head bolts
[3]
Feet of the solar storage tank
10
All manuals and user guides at all-guides.com
A
B
C
6 720 648 083-05.1ITL
6 720 648 083-06.1ITL
4.2

Attaching the Bosch solar pump station (optional)

To save space, the solar pump station can be attached to the solar
storage tank.
CAUTION: Risk of injury from use of the wrong bolts to
attach the solar pump station.
The bolts of the solar pump station do not match the
threads in the bracket on the solar storage tank. These
bolts can destroy the threads in the bracket, preventing
secure attachment of the solar pump station.
B Use only the bolts included with the solar storage tank
to attach solar pump station
(
Chapter 2.1, page 4).
CAUTION: Risk of injury from falling parts.
B Ensure that the solar pump station is secured to
prevent it from dropping while being attached.
Fig. 10 Attaching the solar pump station
[1]
Mounting holes
B Use the bolts included with the solar storage tank to attach the solar
pump station.
B Refer to the separate manual for the solar pump station.
4.3

Water connections

DANGER: Risk of fire from soldering and welding!
B Take appropriate protective measures when
soldering and welding as the thermal insulation is
flammable; for example, cover the thermal insulation.
B Check the integrity of the thermal insulation after
completing work.
WARNING: Risk to health from contaminated water!
Work carried out without due care for cleanliness
contaminates the potable water.
B Install and equip the solar storage tank hygienically in
accordance with national standards and guidelines.
B Flush the solar storage tank and pipework thoroughly
with potable water after installation.
WST50 EL / WST80 EL / WST119 EL – 6 720 648 081 (2012/09)
1
6 720 648 083-07.1ITL

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Wst50 elWst80 elWst119 el

Table des Matières