Removing The Interior Parts; Water Tank - Samsung RB28F Serie Mode D'emploi

USING THE COOLSELECT DUO
(OPTIONAL)
1. Disassemble the chilled room box. (Depending
on the specification, the box can be easily
disassembled when the guard on the right side
is removed.)
2. Move the knob to the left or right side to
manually set the desired temperature.
(The temperature of the chilled room is highest
when the knob is on left side, and lowest when
the knob is on the right side.)
If you set the knob greater than
medium value, The Chilled Room inner
CAUTION
temperature can be lower than a Fridge
Knob Knob
temperature, and the vegetables and fruit
can be frozen.
3. After manually setting the desired temperature,
put the box back to the original place.
(If the guard is removed, assemble the guard
into its original place.)
28_ operating
DA68-02833S-20.indb 28
Knob
Knob
Knob Knob
Knob
Knob
Knob Knob
Knob
Knob Knob

REMOVING THE INTERIOR PARTS

When assembling, put fridge shelves in
the correct position and do not put them
CAUTION
upside down. It may cause a personal
injury or material damage.
When you put the shelves back, make
sure the side with the label "Front" on it
face the front of the refrigerator.
Shelves
Gently lift up the shelves
with both hands and pull it
toward you. (Glass shelf)
Do not put the
shelves upside down or backwards.
CAUTION
There is a risk of falling.
Door guards
Firmly grab the door guards
with both hands and lift it
up gently to remove the
door guards.

Water tank

Lift up the Can Carry and
then firmly grab the water
tank with both hands and
lift it up towards you gently
to remove the water tanks.
Water tank may not be available
depending on the model.
2018. 6. 5. 3:05