Oceanic OCEALED22120B2 Guide D'utilisation page 64

Buttons and display connections
➢ TV buttons
Note : The following is only a block diagram. The actual position and
arrangement of the di different models can be different.
: : Activate / deactivate the power supply.
SOURCE : Input Select the external signal.
MENU : A ffi drying the main menu and confirmation of the selection
of a menu item.
CH +/- : Channel selection.
VOL +/- : Adjust the volume.
➢ Terminal interface
Note : Here are the di ff erent terminal interfaces as well as the position
and disposition. Can diff anaging based on di ff erent models.
AV input
Input of external AV
signal and right audio
channel / left relevant
CI SLOT
The Common
Interface (CI) from
the entrance of the
card reader requires
a Conditional Access
Module (CAM) used
to pay television.
AUDIO PC
VGA and audio input
if VGA
HDMI input
Digital signal input
from the HDMI video
connector.
Antenna
Connect the antenna
input / tv cable (75 /
VHF / UHF)
EN-11
Output HEADPHONES
When headphones are
plugged in, the speakers
are disabled.
USB input
Only for updating the
software.
COAXIAL output
Connect the SPDIF
receiver.
VGA
PC analog signal input
DC 12V
DC 12V car only. A
converter / power
adapter DC12V is not
included and must be
purchased by the user.