Amica DI 600 Notice D'installation page 6

- remove the bracket from the furniture alcove and drill holes facilitating the installation
of the screws 3,9 x 13 (3 pieces) in the previously marked places, - place the support
bracket again into the furniture alcove and affix it using the three 3,9 x 13 screws (see
figure 2),
- fasten the pane onto the screwed in bracket (see figure 3),
- using a Phillips (cross slot) screwdriver screw in the side countering screws (see
figure 3 A) ,
- with the Phillips (cross slot) screwdriver adjust the position of the pane in relation to
the remaining part of the furniture housing ( ± 3 mm) using two top adjusting screws
(see figure 3B).
6
Fig.2
3
+
-
B
A
Fig.3