Télécharger Imprimer la page

Replacing The Light Bulbs - Dacor Renaissance HWO127 Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

To clean the filter:
Soak it in hot, soapy water, then rinse it well, or put it in the
dishwasher's top rack. Wipe the filter dry, thenre-install it.
To install the convection filter:
Clips
Taking care not to mar the porcelain with the filter, center
the it over the fan hole, and carefully hook the metal clips
over the bar across the hole.
Cleaning the Door Gasket
WARNING
Clean the door gasket with extreme caution to avoid compro-
mising the seal required for proper cooking and self-cleaning.
Clean the door gasket by dabbing it with a solution of water
and mild soap. Do not scrub it or it will become damaged.
Cleaning the Oven Racks
CAUTION
Do not self-clean the oven racks.
To clean the oven racks, apply a hot water-detergent solu-
tion. For heavy soil, use a scouring pad with ample water.
(Instead of water, you may use a solution of 1 cup of ammo-
nia to 2 gallons of water.)
CARE AND CLEANING
14
Cleaning the Meat Probe
CAUTION
• Do not immerse the meat probe in water.
• To ensure proper function, dry the probe's plug completely
before connecting it to the oven.
The meat probe has silicone handles, a wire, a plug and a
stainless-steel skewer. To clean the skewer, use a scour-
ing pad and hot, soapy water. When you clean the handles,
wipe them with a soft sponge soaked with a solution of
detergent and warm water. Dry thoroughly.

Replacing the Light Bulbs

This task can be done by the homeowner. If none of the
lights work, before replacing them, consult the Problem
Solution Guide, pg. 17.
WARNING
• To prevent an electric shock hazard and personal injury, turn
off power to the oven, and ensure the oven and bulbs are cool.
• Only use the oven with the lens covers installed. The covers
protect the bulbs from high temp's and mechanical shock.
• Replacing the lens cover without lining up the cutout with the
light socket will damage the light fixture.
• Do not use a screwdriver to remove the lens.
IMPORTANT
Do not touch the replacement halogen bulbs with your fingers.
Oils from your hand make the bulbs burn out faster than normal.
1. Replace the light bulb only with Dacor bulb PN 100429,
12V 20W. (Visit www.everythingdacor.com for ordering
information.)
2. Turn off power to the oven at the circuit breaker/fuse box.
3. Supporting the lens
from below, gently
pry it loose with
a table knife, and
pull the lens cover
straight out.
4. Pull the old bulb
straight out of the
socket.
5. Wearing a glove,
take the new bulb,
and insert it in the
socket.
6. In reinstalling the
lens cover, line up
the cutout on the inside rim with the light socket, and
gently press it into place.
7. Return power to the oven, and reset the clock (pg. 4).
Light socket
Light bulb
Cutout on
inside rim of
lens

Publicité

Chapitres

loading

Ce manuel est également adapté pour:

Renaissance hwo130Renaissance hwo227Renaissance hwo230