Télécharger Imprimer la page

Troubleshooting; Technical Data; Disposal - SilverCrest SKM 600 A1 Mode D'emploi

Masquer les pouces Voir aussi pour SKM 600 A1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28

Troubleshooting

If the appliance suddenly stops working:
The appliance has overheated and triggered the
automatic safety cut-out .
Turn the rotary switch 3 to "OFF" .
Remove the plug from the wall socket .
Allow the appliance to cool for 15 minutes .
If the appliance has not yet cooled off com-
pletely after 15 minutes, it will not start .
Wait a further 15 minutes and try switching
on again .
If the appliance cannot be switched on.
Check that the plug is correctly connected to
a wall socket .
Check whether the swivel arm 1 is in the
correct position .

Technical data

Input voltage:
Power consumption: 600 W
Protection class:
Max . capacity
Mixing bowl 6:
All parts of this appliance which come into
contact with food are food-safe .
We recommend the following operating times:
When working with the kneading hook 0, whisk q
or beater w, allow the appliance to cool down
after 10 minutes of operation .
If you exceed this operating time, the appliance
can overheat and be damaged!
20 
GB │ IE
All manuals and user guides at all-guides.com
220 – 240 V ∼
(alternating current),
50 – 60 Hz
II /
(double insulation)
approx . 5 l

Disposal

Never dispose of the appliance
in your normal domestic
waste . This product is subject
to the provisions of European
Directive 2012/19/EU .
Dispose of the appliance through an approved
disposal facility or your municipal waste
facility . Please observe the currently applicable
regulations . Please contact your waste disposal
centre if you are in any doubt .
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product .
The packaging is made from
environmentally friendly material and
can be disposed of at your local
recycling plant .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary . The
packaging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composites .
SKM 600 A1

Publicité

loading

Ce manuel est également adapté pour:

314615316618317345317346