DLA-G150CLU&CLE_Eng.book Page 16 Thursday, February 21, 2002 2:39 PM
Installing the Projector
Adjusting the Inclination of the Projector
The vertical angle and the leveling of the projector can be adjusted with the adjustable feet at the bottom of the projector.
I
Adjusting the vertical angle of the projector
While pushing the levers on both sides upward, raise the projector. The adjustable feet automatically extend.
To retract the feet, push the levers and lower the projector slowly; the projector is fixed at the position
where you release the levers.
I
Leveling the projector
Lift the projector, rotate the rear adjustable foot, and adjust the horizontal angle until the projector is level.
16
Adjustable feet (at the front)
Adjustable foot (at the rear)
DLA-G150CLU / LCT1123-001B / ENGLISH
lever
Fixing foot (at the rear)
Extend
Shorten