NETGEAR WNA1000 Guide D'installation page 3

Then, install your WNA1000 adapter and connect to
a wireless network
Express will install the WNA1000 software and your program features will be configured
automatically. You will be prompted to connect your adapter.
1. Locate an available USB port on your PC.
2. Insert the wireless adapter into the USB port. You
can attach the wireless USB adapter directly or use
the USB cable (see "Affixing the USB Adapter
Cradle").
Note: For best results, put the wireless adapter at
least 4 feet (1 meter) away from your router.
3. Click Next. You will be prompted to connect to a
wireless network:
• If you have a wireless router or access point that supports Push 'N' Connect
(NETGEAR's Wi-Fi Protected Setup), then you will be prompted by the first
screen. Leave the Yes... radio box checked and click Next to continue. Follow the
Smart Wizard steps to connect using WPS (Wi-Fi Protected Setup).
Note: You can choose to bypass Push 'N' Connect by selecting No, I do not want
to use Push 'N' Connect and click Next.
• If no WPS-capable devices are detected, you will be prompted by the second
screen. Select your wireless network name from the list of wireless networks and
click Next to continue. If you select a secured network, the Smart Wizard will
detect it and you will be prompted to enter your passphrase.
WPS-capable networks in your area
English
All manuals and user guides at all-guides.com
2
No WPS-capable networks in your area